Relationship Between Prepatellar Fat Thickness and Bone Mineral Density.

OBJECTIVE: To evaluate the relationship between bone mineral density (BMD) by measuring the prepatellar fat thickness with knee radiography and to gain a measurement method that has not been done before in the literature. STUDY DESIGN: Cross-sectional descriptive study. Place and Duration of the Study: Department of Physical Medicine and Rehabilitation, Training and Research Hospital, Sanliurfa, Turkiye, between January and June 2020. METHODOLOGY: Patients' age, body mass index (BMI) data, prepatellar fat thickness (mm), L1-L4 total, bone mineral density femoral neck, femur trochanter major, and femur total T scores were recorded. The relationships between these three groups (normal, osteopenia, osteoporosis) and between prepatellar fat tissue measurement were evaluated. One-way analysis of variance (ANOVA) and Post Hoc Tukey tests were used in the analysis. RESULTS:  A statistically significant difference was found in terms of trochanter major T score measurements (X2 = 20.435; p <0.001) and BMI (X2 = 66.535; p <0.001) measurements of prepatellar fat thickness measurement. A statistically significant difference was found between the three groups in terms of prepatellar fat thickness measurement, L1-4 T-score, femoral neck, and femur total values (p <0.001). CONCLUSION:  Prepatellar fat thickness in postmenopausal Turkish women was positively correlated with BMD; BMD increases as the prepatellar fat thickness increases. This explains that perapatellar fat thickness creates a mechanical load on the bones and causes an increase in BMD. KEY WORDS: Osteoporosis, Fat thickness, Bone mineral density.

A new and simple method for patellar height measurement: Fibula-condyle-patella angle.

OBJECTIVES: This study aims to evaluate the inter-observer reliability of fibula-condyle-patella angle measurements and to compare it with other measurement techniques. PATIENTS AND METHODS: Between January 01, 2023 and January 31, 2023, a total of 108 patients (20 males, 88 females; mean age: 47.5±12.0 years; range, 18 to 72 years) who underwent X-rays using the fibula-condyle-patella angle, Insall-Salvati, Caton-Deschamps, Blackburne-Pell, and plateau-patella angle (PPA) methods were retrospectively analyzed. Knee lateral radiographs taken in at least 30 degrees of flexion and appropriate rotation were scanned. All measurements were made by two orthopedic surgeons who were blinded to measurement methods. RESULTS: Right knee patellar height measurements were conducted in 56 patients, while left knee patellar heights were assessed in 52 patients. The highest inter-observer concordance was found in the fibula-condyle-patella angle. The second highest concordance was found in the Insall-Salvati. The highest concordance correlation was found with PPA in the measurements of both researchers. CONCLUSION: The fibula-condyle-patella angle is a reliable technique with a good inter-observer reliability for measuring patellar height. We believe that this study will inspire future research to establish comprehensive reference values for clinical applications.

Evaluation of the relationship between the anatomical characteristics of the vastus medialis obliquus muscle and the patella chondral lesion occurrence.

OBJECTIVES: The study aims to investigate the relationship between the vastus medialis obliquus (VMO) muscle distal insertion features and patellar chondral lesion presence. PATIENTS AND METHODS: This cross-sectional study included a total of 100 patients (18 males, 82 females, mean age 67.2±7.1 years; range, 50 to 86 years) who underwent total knee arthroplasty (TKA). Radiological assessments, including merchant view and standing orthoroentgenograms, were conducted. The current osteoarthritis stage, varus angle, quadriceps angle (Q angle), patella-patellar tendon angle (P-PT angle), congruence angle, and sulcus angle were calculated. The VMO tendon length, muscle fiber angle, tendon insertion width measurements, and patellar chondral lesion localization data were obtained intraoperatively. Grouping was done according to the distal insertion width of the VMO tendon to the medial edge of the patella. The medial rim of the patella was divided into three equal-sized sectors. The first group (Group 1, n=31) consisted of patients who had an insertion from the quadriceps tendon into the upper one-third of the patella. The second group (Group 1, n=48) consisted of patients with a distal insertion expanding into the middle one-third of the patella. The third group (Group 3, n=21) consisted of patients who had a distal insertion extending into the distal third region of the medial patella margin. The patella joint surface was divided into sectors, and the presence and location of cartilage lesions were noted in detail. RESULTS: The mean tendon insertion width rate was 45.99±16.886% (range, 16.7 to 83.3%). The mean muscle fiber insertion angle was 51.85±11.67º (range, 20º to 80º). The mean tendon length was 12.45±3.289 (range, 4 to 20) mm. There was no significant difference between the mean age, weight, height, body mass index, BMI, fiber angle, tendon length, varus angle, Q angle, sulcus angle, and congruence angle data among the groups. In terms of the P-PT angle, Groups 1 and 2 had a significant relationship (p=0.008). No relationship was found between the mean fiber insertion angle, mean tendon length, or the presence of chondral lesions. There was a statistically significant difference among the groups regarding the presence of chondral lesions. The highest percentage of chondral lesion frequency was observed in Group 3 (95.24%), followed by Group 1 (90.3%) and Group 2 (89.6%), respectively. Compared to the other two groups, Group 3 had a higher average ratio of lesion areas per patient. CONCLUSION: Our study results demonstrate that the formation and localization of the patellar chondral lesions are affected by the insertion width type of the VMO muscle into the patella. Group 2-type insertion is associated with a lower lesion frequency rate than Groups 1 and 3.

Editorial Commentary: When Managing Patellofemoral Instability, Mind Your P's and Q's: Medial Patellofemoral Ligament Versus Medial Quadriceps Tendon Femoral Ligament Versus Medial Patellofemoral Complex.

Our understanding of patellar instability and the medial patellofemoral complex (MPFC) has evolved over the past 15 years. Despite advancements and appreciation of the anatomy and biomechanics of the MPFC, the best surgical treatment for recurrent patellar instability has yet to be determined. The goals of medial patellofemoral ligament (MPFL), medial quadriceps tendon femoral ligament (MQTFL), or MPFC reconstructions (with grafts from both the patella and quad to the femur) are to return patients back to activity and avoid complications such as recurrent instability, overconstraint, secondary arthrosis, and potential patellar fracture from surgical drill holes. Other considerations when managing recurrent instability include patella alta, hypermobility, and whether an osteotomy procedure is indicated. Although we always need to make good choices and mind our P's and Q's, the big question remains: Is MPFL, MQTFL, or MPFC the best choice for our patients?

Medial Patellofemoral Reconstruction Techniques for Patellar Instability.

The medial patellofemoral complex (MPFC) is the term used to describe the primary soft tissue stabilizer of the patella, which consists of fibers that attach to the patella (medial patellofemoral ligament, or MPFL), and the quadriceps tendon (medial quadriceps tendon femoral ligament, or MQTFL). Despite the variability of its attachment on the extensor mechanism, the midpoint of this complex is consistently at the junction of the medial quadriceps tendon with the articular surface of the patella, indicating that either patellar or quadriceps tendon fixation can be used for anatomic reconstruction. Multiple techniques exist to reconstruct the MPFC, including graft fixation on the patella, quadriceps tendon, or both structures. Various techniques using several graft types and fixation devices have all reported good outcomes. Regardless of the location of fixation on the extensor mechanism, elements critical to the success of the procedure include anatomic femoral tunnel placement, avoiding placing undue tension on the graft, and addressing concurrent morphological risk factors when present. This infographic reviews the anatomy and techniques for the reconstruction of the MPFC, including graft configuration, type, and fixation, while addressing common pearls and pitfalls in the surgical treatment of patellar instability.

Increased lower limb length ratio in patients with patellar instability.

PURPOSE: Patellar height is a risk factor for patellar instability, correlated with the tibia length/femur length (T/F) ratio. This study aimed to explore the changes in the T/F ratio in patients with patella instability and the potential correlation with the morphology of the patellofemoral joint and extensor moment arm. METHOD: A retrospective analysis was performed to assess the ratio of lower limb length morphological characteristics of the patellofemoral by full weight-bearing long-leg standing radiographs, magnetic resonance imaging, and computed tomography in 75 patients with patellar instability and 75 participants from a randomly selected control group from January 2020 to September 2021. A total of eight parts were measured, including mechanical tibia length/femur length (mT/F) ratio, anatomical tibia length/femur length (aT/F) ratio, hip-knee-ankle angle, femoral neck-shaft angle, femoral valgus cut angle, patellar height, Dejour classification, sulcus angle, trochlear angle, medial trochlear inclination, lateral trochlear inclination, patella tilt angle and patellar tendon moment arm to evaluate the difference of morphology between patient group and control groups. RESULTS: The mT/F (0.840 ± 0.031 vs. 0.812 ± 0.026, p < 0.001) and aT/F (0.841 ± 0.033 vs. 0.808 ± 0.028, p < 0.001) ratios in the patient group were significantly greater than that in the control group. There was a significant correlation between patellar height and increased mT/F and aT/F ratios (p < 0.05). CONCLUSION: Patients with patellar instability had a larger lower limb length ratio, and the change in lower limb length ratio was correlated with patellar height.

Machine learning and discriminant function analysis in the formulation of generic models for sex prediction using patella measurements.

Sex prediction from bone measurements that display sexual dimorphism is one of the most important aspects of forensic anthropology. Some bones like the skull and pelvis display distinct morphological traits that are based on shape. These morphological traits which are sexually dimorphic across different population groups have been shown to provide an acceptably high degree of accuracy in the prediction of sex. A sample of 100 patella of Mixed Ancestry South Africans (MASA) was collected from the Dart collection. Six parameters: maximum height (maxh), maximum breadth (maxw), maximum thickness (maxt), the height of articular facet (haf), lateral articular facet breadth (lafb), and medial articular facet breath (mafb) were used in this study. Stepwise and direct discriminant function analyses were performed for measurements that exhibited significant differences between male and female mean measurements, and the "leave-one-out" approach was used for validation. Moreover, we have used eight classical machine learning techniques along with feature ranking techniques to identify the best feature combinations for sex prediction. A stacking machine learning technique was trained and validated to classify the sex of the subject. Here, we have used the top performing three ML classifiers as base learners and the predictions of these models were used as inputs to different machine learning classifiers as meta learners to make the final decision. The measurements of the patella of South Africans are sexually dimorphic and this observation is consistent with previous studies on the patella of different countries. The range of average accuracies obtained for pooled multivariate discriminant function equations is 81.9-84.2%, while the stacking ML technique provides 90.8% accuracy which compares well with those presented for previous studies in other parts of the world. In conclusion, the models proposed in this study from measurements of the patella of different population groups in South Africa are useful resent with reasonably high average accuracies.

Quantifying the Relationship Between the Medial Quadriceps Tendon-Femoral Ligament and Patellar Borders: A Pediatric Cadaveric Study.

BACKGROUND: The medial patellofemoral complex (MPFC) is a structure composed of the medial quadriceps tendon-femoral ligament (MQTFL) superiorly and the medial patellofemoral ligament (MPFL) inferiorly. The pediatric MPFL anatomy has been well described, but the precise anatomy of the MQTFL has only recently been described and studied in skeletally immature patients. PURPOSE: To describe the anatomic relationship between the MQTFL and its insertion on the quadriceps tendon and patella in pediatric specimens. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 22 pediatric cadaveric knee specimens were dissected to analyze attachment of the MQTFL to the quadriceps tendon and patella. Dissection was facilitated using lateral parapatellar arthrotomy followed by eversion of the extensor mechanism to evaluate MQTFL fibers from its undersurface. RESULTS: The mean specimen age was 7.4 years. Specimens were divided based on age into a younger cohort (1-2 years), middle cohort (4-8 years), and older cohort (9-12 years). The quadriceps tendon attachment (QTA) of the MQTFL proximal to the patella extended a median of 5.0 mm in the younger cohort, 11.4 mm in the middle cohort, and 12.0 mm in the older cohort, with significant differences found between the younger and middle cohorts (P < .047) and the younger and older cohorts (P < .001). The QTA as a percentage of patellar articular height averaged 44.4% across all specimens. The vertical height of the patella measured a median of 14.0 mm, 22.3 mm, and 27.3 mm in the younger, middle, and older cohorts, respectively. CONCLUSION: This study expands on the recently described anatomy of the pediatric MPFC to quantify the anatomic relationship between the MQTFL attachment to the quadriceps tendon and patella in a more clinically relevant cohort of donor specimens. CLINICAL RELEVANCE: As access to pediatric cadaveric tissue is extremely limited, a better understanding of MPFC and MQTFL anatomy will support surgeons in preoperative planning and intraoperative considerations for their approach to MQTFL and MPFL reconstruction. This may facilitate improved anatomic surgical stabilization of the patellofemoral joint in pediatric patients.

Morphological characteristics of the infrapatellar fat pad.

The relationship between the morphological characteristics of the infrapatellar fat pad (IFP) and joint deformity has yet to be fully elucidated. Therefore, the purpose of this study was to clarify the morphological characteristics of the IFP and to identify the relationships between morphological characteristics of the IFP and degenerative grade of the articular surface of the patella. This investigation examined 41 legs from 25 Japanese cadavers. The IFP length, width, and volume were measured. It was categorized into three types: Type I, IFP proximal located on medial and lateral sides of the patella; Type II, the IFP proximal only located medially; and Type III, absence of the IFP proximal. Articular surfaces were graded as macroscopically intact or mildly altered (Grade I), moderately (Grade II), or severely (Grade III). Grade III was significantly more frequent than Grades I or II in Type III. IFP volume was significantly larger in Type I than in Types II or III. A negative correlation was found between the degenerative grade of the articular surface of the patella and IFP volume. It was suggested that a relationship between the degenerative grade of the articular surface of the patella and the IFP volume.

A Comprehensive Description of the Lateral Patellofemoral Complex: Anatomy and Anisometry.

BACKGROUND: The lateral patellofemoral complex (LPFC) is an important stabilizer of the patella composed of the lateral retinacular structures including the lateral patellofemoral ligament (LPFL), the lateral patellomeniscal ligament (LPML), and the lateral patellotibial ligament (LPTL). While the isolated anatomy of the LPFL has been previously described, no previous study has investigated the entirety of the LPFC structure, length changes, and radiographic landmarks. An understanding of LPFC anatomy is important in the setting of LPFL injury or previous lateral release resulting in iatrogenic medial instability requiring LPFC reconstruction. PURPOSE: To both qualitatively and quantitatively describe the anatomy and length changes of the LPFC on gross anatomic dissections and standard radiographic views. STUDY DESIGN: Descriptive laboratory study. METHODS: Ten nonpaired cadaveric specimens were utilized in this study. Specimens were dissected to identify distinct attachments of the LPFL, LPML, and LPTL. Ligament lengths, footprints, and centers of each attachment were described with respect to osseous landmarks using a 3-dimensional coordinate measuring device. Ligament length changes were also assessed from 0° to 90° of flexion. Radiopaque markers were subsequently utilized to describe attachments on standard anteroposterior and lateral radiographic views. RESULTS: The individual elements of the LPFC were identified in all specimens. The LPFL patellar attachment had an average total length of 22.5 mm (range, 18.3-27.5 mm), involving a mean of 59% (range, 50%-75%) of the sagittal patella. Based on the average patellar size, a mean of 63% of the LPFL attached to the patella, and the remainder (11.1 ± 1.4 mm) inserted into the patellar tendon. The femoral attachment of the LPFL had a mean maximum length of 24.4 ± 4.3 mm. The center of the LPFL femoral attachment was a mean distance of 13.5 ± 3.2 mm anterior and distal to the lateral epicondyle. The LPFL demonstrated significant shortening, especially in the first 45° of flexion (7.5 ± 5.1 mm). In contrast, the LPTL (5.5 ± 3.0 mm) and LPML (10.0 ± 3.3 mm) demonstrated significant shortening from 45° to 90°. On lateral radiographs, the center of the femoral attachment of the LPFL was a mean total distance of 19.2 ± 7.2 mm from the lateral epicondyle. CONCLUSION: The most important findings of this study were the correlative anatomy of 3 distinct lateral patellar ligaments (LPFL, LPML, and LPTL) and their anisometry through flexion. All 3 components demonstrated significant shortening during flexion. The quantitative and radiographic measurements detailed the LPFL osseous attachment on the patella; soft tissue attachment on the patellar tendon; and finally, the osseous insertion on the femur distal and anterior to the lateral epicondyle. Similarly, the authors documented the meniscal insertion of the LPML and defined a patellar insertion of the LPTL and LPML as a single attachment. These data allow for reproducible landmarks to aid in the understanding and reconstruction of the lateral patellar restraints. CLINICAL RELEVANCE: The data produced from this investigation provide a comprehensive description of these 3 lateral patellar stabilizers (LPFL, LPML, LPTL). These data can be used intraoperatively to facilitate anatomic reconstructions of the lateral patellar stabilizers.

Sex determination from human patella in a Polish medieval sample.

This study aimed to address whether the anthropometric features of the patella can be used to determine the sex of the individuals on the basis of the skeletal remains and to set limit values for anthropometric measurements and indicators of the patella in relation to each sex. 71 patellas (32 female and 39 male) from the Middle Ages from Wroclaw, Poland, were analyzed. The measurements (the greatest height, width, thickness, width of the lateral and medial joint surface and the height of these joint surfaces) and ratios were calculated (height to width, height to thickness as well as width to height of lateral and medial joint surfaces) and tested according to sexual dimorphism. The best parameter in terms of discriminatory assessment was the patella's highest height, which made it possible to classify the sex in 46.5% of cases. However, an index of the sum of the height, width and thickness measurements seems to be even better for differentiating between the sexes, making it possible to correctly classify the sex in 49.3% of cases. Due to some limitations of this study and the need of population-specific standard, it is recommend to employ the patella in sex determination only in cases of fragmented human remains and when no other method can be applied. Further investigation of possible factors influencing the variability of its size and shape should be explored in larger and geographically more diverse samples, and this could contribute to forensic, clinical, anatomical, and anthropological studies in this body part.

Sesamoid bones also show functional adaptation in their microanatomy-The example of the patella in Perissodactyla.

The patella is the largest sesamoid bone of the skeleton. It is strongly involved in the knee, improving output force and velocity of the knee extensors, and thus plays a major role in locomotion and limb stability. However, the relationships between its structure and functional constraints, that would enable a better understanding of limb bone functional adaptations, are poorly known. This contribution proposes a comparative analysis, both qualitative and quantitative, of the microanatomy of the whole patella in perissodactyls, which show a wide range of morphologies, masses, and locomotor abilities, in order to investigate how the microanatomy of the patella adapts to evolutionary constraints. The inner structure of the patella consists of a spongiosa surrounded by a compact cortex. Contrary to our expectations, there is no increase in compactness with bone size, and thus body size and weight, but only an increase in the tightness of the spongiosa. No particular thickening of the cortex associated with muscle insertions is noticed but a strong thickening is observed anteriorly at about mid-length, where the strong intermediate patellar ligament inserts. The trabeculae are mainly oriented perpendicularly to the posterior articular surface, which highlights that the main stress is anteroposteriorly directed, maintaining the patella against the femoral trochlea. Conversely, anteriorly, trabeculae are rather circumferentially oriented, following the insertion of the patellar ligament and, possibly also, of the quadriceps tendon. A strong variation is observed among perissodactyl families but also intraspecifically, which is in accordance with previous studies suggesting a higher variability in sesamoid bones. Clear trends are nevertheless observed between the three families. Equids have a much thinner cortex than ceratomorphs. Rhinos and equids, both characterized by a development of the medial border, show an increase in trabecular density laterally suggesting stronger stresses laterally. The inner structure in tapirs is more homogeneous despite the absence of medial development of the medial border with no "compensation" of the inner structure, which suggests different stresses on their knees associated with a different morphology of their patellofemoral joint.

Testing the validity of population-specific sex estimation equations: An evaluation based on talus and patella measurements.

Sex estimation is essential for forensic scientists to identify human skeletal remains. However, the most sexually dimorphic elements like pelvis or skull are not always assessable. Osteometric analyses have proven useful in sex estimation, but also to be population specific. The main purpose of this study was to test the validity of contemporary Greek and Spanish discriminant functions for the talus and the patella, respectively, on a Swiss skeletal sample and to quantify the utility of the measurements as a novel approach in osteometric sex assessment. Four talus and three patella measurements on dry bone were obtained from 234 individuals of the modern cemetery SIMON Identified Skeletal Collection. The previously derived discriminant functions were applied, accuracies determined, the utility of the different measurements was assessed and new multivariable equations constructed. Accuracies varied between 67% and 86% for talus and 63% and 84% for patella, similar to those reported by the original studies. Multivariable equations should be preferred over equations based on single measurements and combining the most significant measurements rather than using several variables obtained the best possible accuracy. The new discriminant functions did not provide a substantial improvement to the original ones. The overall utility of talus and patella is limited, allowing sex estimation with sufficient certainty only in a small proportion of individuals. Discriminant functions developed in contemporary Greek or Spanish populations are in principle applicable also to Swiss contemporary populations. We recommend that at present existent studies of this type should be validated and tested rather than developing new formulas.

Anthropometric measurements of patellar ridge using computed tomography-based three-dimensional computer models.

BACKGROUND: The objectives of this study were to investigate the anatomic morphology of patellar ridge using computed tomography-based three-dimensional (3D) computer models and to assess the center of the patellar ridge after virtual resections. METHODS: We selected 80 patients, 40 males (age, 33.2±6.8 years) and 40 females (age, 30.6±7.2 years), who were slightly symptomatic with soft tissue injury of the knee joint. The right or left knees were scanned by computed tomography (CT). The CT data of 160 knees was used to construct 3D computer models by image analysis software (Mimics). Variables such as the angle between the patellar ridge and patellar long axis, the distance between the center of the patellar ridge and the center of patellar cut after virtual resections were measured. We detect differences between the sides and genders with the 3D computer models by Student's t test. Simple linear regression and correlation test was used to correlate the patellar ridge center to the center of the patellar cut. RESULTS: According to the available data, there were significant gender differences in the length and width of patellar cut after virtual resections even with strict control for the height and weight of the patients. The angle between the patellar ridge and the patellar long axis was 11.24° ± 3.62°. The angle in male patients was 10.17° ± 4.82°, and it was 12.28°± 3.78° in female patients. The morphological difference was statistically significant (P < 0.05). After using the subchondral method to virtually resect the patellae, with reference to the center of the patellar cut, the center of the patellar ridge lies superiorly and medially in 88.75%, inferiorly and medially in 8.75%, laterally and superiorly in 2.5%, and in no case laterally and inferiorly. The intra-observer reliability regarding the dimensional measurements was excellent in this study. CONCLUSIONS: Advances in 3D computer models had resulted in the availability of preoperative measurement and virtual planning. The anthropometric dimensions of this study could provide general information for guiding surgical management of the patella in total knee arthroplasty (TKA) and were useful in designing patellar implants. CLINICAL RELEVANCE: The placement of the patellar component during TKA differs from one patella to another. The anatomic morphology information of the patellar ridge is helpful for surgeons to perform patellar resurfacing in TKA.

Three-dimensional printing educational anatomical model of the patellar luxation in dogs.

BACKGROUND: Few studies are available for assessing the current situation of 3D printing in veterinary medicine, due to the recent popularization of this technology. This study aimed to simulate a 3D model of the femorotibiopatellar joint of dogs based on the medial patellar luxation. The scanning, editing and printing of the femur, tibia, fibula and patella of a dog from the Laboratory of Anatomy of FMVZ USP were performed. RESULTS: Three femorotibiopatellar joint models were printed: one representing a healthy join without alterations; the second one with the medially deviated tibial tuberosity; and a last one representing the shifted tibial tuberosity and the trochlear sulcus flattened as consequence. The 3D edition consisted of medial rotation of the tibia and tibial tuberosity (22° against the healthy tibia), and the flatten of the medial femoral condyle (0.2 cm) and femoral trochlear groove. After printing, the corresponding measurements were taken with the alterations and the bone models were made with elastics to represent the anatomical components of the dog joint. Finally, the measurements corresponding to the distance from the patellar ligament to the lateral femoral condyle were taken in each specimen, in order to observe the change in position of the ligament according to the occurrence of the bone alterations. CONCLUSION: We printed 3D articular anatomical components of the femurotibiopatellar joint that could be valuable educational tools for the study of medial patellar luxation in dogs.

Examination of the proximodistal patellar position in small dogs in relation to anatomical features of the distal femur and medial patellar luxation.

OBJECTIVE: To determine the influence of anatomical features of the distal femur on the proximodistal patellar position and compare the proximodistal patellar position between dogs with and without medial patellar luxation (MPL). STUDY DESIGN: Retrospective case series (n = 71). METHODS: Mediolateral-view radiographs of clinical cases of dogs weighing less than 15 kg were obtained. The stifle joint angle, patellar ligament length, patellar length, size of the femoral condyle, trochlear length, and trochlear angle were measured and included in multiple linear regression analyses to ascertain their effects on the proximodistal patellar position. Radiographs were divided into MPL and control groups. The effects of MPL on the proximodistal patellar position and morphological factors were also examined. RESULTS: The final model for the proximodistal patellar position revealed that the patella became distal as the ratio of the patellar ligament length to patellar length decreased, the trochlear angle relative to the femur increased, the trochlear length relative to the patellar length increased, or the trochlear length relative to the femoral condyle width decreased. The proximodistal patellar position in the MPL group was not significantly different from that in the control group despite the trend towards a distally positioned patella (p = 0.073). The MPL group showed a significantly shorter trochlea (p<0.001) and greater trochlear angle relative to the femur (p = 0.029) than the control group. CONCLUSION: The proximodistal patellar position depends on multiple factors, and its determination based on PLL/PL alone may not be appropriate. Dogs with MPL did not have a proximally positioned patella compared with dogs without MPL. Although hindlimbs with MPL had a shorter trochlea than those without patellar luxation, this difference did not appear to be sufficient to displace the patellar position proximally in small dogs, possibly compensated by increased trochlear angle relative to the femur.

Three-dimensional motion of the patella in French bulldogs with and without medial patellar luxation.

BACKGROUND: French bulldogs exhibit significantly larger femoral external rotation and abduction than other breeds. We were curious as to whether this peculiar leg kinematic affects patellar motion and/or might induce medial patellar subluxation (MPSL) or medial patellar permanent luxation (MPPL). We hypothesized that the more abducted leg posture during stance causes an unusual medial pull direction of the rectus femoris muscle during stance, and that this may facilitate the occurrence of MPSL or even MPPL during locomotion. To test our hypothesis, we analyzed existing stifle-joint X-ray-sequences collected during the treadmill walk and trot of seven adult female French bulldogs. We estimated 3D-patellar kinematics using Scientific Rotoscoping. RESULTS: The three-dimensional motion of the patella comprises rotations and translations. From the seven dogs analyzed, three exhibited MPSL and one MPPL during the gait cycle. Medial patellar luxation (MPL) occurred mostly around toe-off in both gaits studied. Patellar position was generally not gait-related at the analyzed timepoints. In dogs with MPL, the patella was placed significantly more distally (p = 0.037) at touch-down (TD) and at midswing (p = 0.024), and significantly more medial at midswing (p = 0.045) compared to dogs without MPL. CONCLUSIONS: Medial patellar luxation seems to be the consequence of the far from parasagittal position of the stifle joint during stance due to a broad trunk, and a wide pelvis. This peculiar leg orientation leads to a medial sideway pull caused by the rectus femoris muscle and the quadriceps femoris and may initiate plastic deformation of the growing femur and tibia. Thus, a way to avoid MPL could be to control breeding by selecting dogs with lean bodies and narrow pelvis. Actual breeding control programs based on the orthopedic examination are susceptible to errors. Systematic errors arise from the fact that the grading system is highly dependent on the dog's condition and the veterinarians' ability to perform the palpation on the stifle. Based on our results, the position of the patella at TD, or even perhaps during stand might offer a possibility of an objective radioscopic diagnostic of the MPL.

A cadaveric study of the location and morphology of the central patellar ridge for bone-patellar tendon-bone graft.

INTRODUCTION: The central ridge of the patella is the thickest area of patella and varies among patients. This cadaveric study identified the location and thickness of the bone at the central patella ridge for bone-patellar tendon-bone (BPTB) harvesting. MATERIALS AND METHODS: Fifty cadaveric knees were assessed. First, the morphology, length, width, and location of the central patellar ridge were recorded. Then, we transversely cut the patella 25 mm from the lower pole and measured the thickness of the anterior cortex, cancellous bone, and cartilage from both the mid-patella and the central ridge location. Finally, the depth of the remaining cancellous bone at the mid-patella was compared to the bone at the central ridge. RESULTS: The location of the central-patellar ridge deviated medially from the mid-patella in 46 samples with an average distance of 4.36 ± 1 mm. Only 4 samples deviated laterally. The mean patella length was 41.19 ± 4.73 mm, and the width was 42.8 ± 5.25 mm. After a transverse cut, the remaining cancellous bone was significantly thicker at the central ridge compared to the bone at the mid-patella. CONCLUSIONS: Most of the central patellar ridge deviated medially, approximately 4 mm from the mid-patella. Harvesting the graft from the central ridge would have more remaining bone compared to the mid-patella.

Pre-operative patella alta does not affect midterm clinical outcomes and survivorship of patellofemoral arthroplasty.

PURPOSE: The purpose of this study was to evaluate the effect of preoperative patella alta on clinical outcomes, survivorship, and complication and reoperation rates on patellofemoral arthroplasty (PFA). METHODS: All patients who underwent PFA for isolated patellofemoral arthritis by a single surgeon at our institution were identified. Preoperative radiographs were measured by two independent observers for patellar height using the Caton Deschamps (CD), Insall-Salvati (IS), and Blackburne-Peele (BP) methods. Patients were classified as either "patella alta" or "non-patella alta" for all three measurement methods. Clinical scores including KSS Pain, KSS Function, and Tegner Activity Scores were collected pre- and post-operatively. Failure was defined as conversion to total knee arthroplasty (TKA). Clinical outcomes and survivorship were compared between patients with "patella alta" and "non-patella alta" height measurements. RESULTS: There were 119 patients with 153 knees (86% female) included in the study with a mean age of 55.8 years. Outcome scores improved from pre-operative to post-operative for both patella alta and non-patella alta patients for Tegner, KSS pain and KSS function scores. The mean change in Tegner scores for patella alta and non-patella alta patients were not significantly different for CD (p = 0.24), IS (p = 0.25) or BP measurements (p = 0.39). The mean change in KSS pain scores between groups were not significantly different for CD (p = 0.33) or IS measurements (p = 0.22), but was improved more significantly in patella alta patients vs non-patella alta patients (21.2 and 14.4; p = 0.02) for BP measurement. The mean change in KSS function scores between groups was not significantly different for CD (p = 0.61) IS (p = 0.90) or BP measurements (p = 0.79). The overall survivorship from conversion to total knee arthroplasty (TKA) was 94.1% at a mean follow-up time of 5.0 (SD 2.6) years. There were no significant differences in survivorship from TKA between patella alta and non-patella alta groups (CD: p = 0.72, IS: p = 0.63, BP: p = 0.66). CONCLUSIONS: This study suggests that there are no significant differences in clinical outcome scores or survivorship from TKA between patella alta and non-patella alta patients who underwent onlay design PFA. Both patella alta and non-patella alta patients demonstrated excellent improvement in outcome scores from pre-operative to post-operative. LEVEL OF EVIDENCE: IV.